Valve CAD Block

Valve CAD Block

‍

Fully Customizable: Change the size and color of the valve CAD block, allowing clients to differentiate the shape with ease

‍

Break-Apart Feature: Use the "Break Apart" feature to customize the shape of the valve CAD block according to your plan requirements

‍

Compatibility with AutoCAD: The valve CAD block is fully compatible with most industry design software, including AutoCAD and ArcSite

‍

Clean and Readable Linework: Built to match ArcSite’s drawing standards for clean plan sets

‍

Top Row (Left to Right)

‍

1. Globe Valve with Actuator
   • Globe valve (regulates flow) with an actuator above (automatic control).
2. Manual Valve with Limit Switch
   • Manual valve with position limit switch or feedback device.
3. Solenoid-Operated Valve
   • Valve controlled by a solenoid (electromagnetically operated).
4. Gate Valve
   • A gate valve that opens by lifting a gate (or wedge) out of the path of the fluid.
5. Ball Valve
   • A ball valve with a quarter-turn motion used to stop/start flow.

‍

Middle Row (Left to Right)

‍

6. Check Valve
   • Allows flow in only one direction (non-return valve).
7. Control Valve (Actuated)
   • Valve inside a control loop, possibly pneumatically or electrically actuated.
8. Needle Valve
   • A small, precision valve for fine flow control.
9. Pressure Relief Valve
   • Releases pressure when it exceeds a set limit.
10. Double Light Symbol (not a valve)

• Appears to be a lighting symbol (e.g., indicator or lamp); not valve-related.

‍

Bottom Row (Left to Right)

‍

11. Butterfly Valve

• Valve that rotates a disk to regulate flow; typically quarter-turn.

12. Flow Indicator Valve

• A valve with a built-in indicator showing flow status.

13. Diaphragm Valve with Actuator

• Uses a flexible diaphragm to regulate flow; actuator shown.

14. Drain or Vent Valve

• A valve connected to a drain or bleed line.

15. 3-Way Valve (Tee Valve)

• Valve with three ports, used to mix or divert flow.

‍

‍